Jump to content
dynonrw

Base Map 350Z VQ35

Recommended Posts

Hello guys ,

i will be running a 350Z VQ35 engine on a G4  ecu ,i am interested in help,  or if some one can provide me a base map for this engine .

Thank you in advance ... dynonrw

Share this post


Link to post
Share on other sites

Hello guys ,

i will be starting- running a new projekt nissan 350z vq35 singel vanos .

I am interested in help - wirring diagram or some base map to start this engine faster .

Thank xou in advance .... dynonrw

Share this post


Link to post
Share on other sites

Hello guys,

i will be starting to run and set up a vipec i/v88 ecu on my 350Z VQ35 singel vans.

If some one can help it will be fine .

Pin out drawing or basemap will helpfull.

Thank you in advance ... dynonrw

 

Share this post


Link to post
Share on other sites

Hi Dynonrw, since you had started 3 separate threads in two different forums all asking the same thing I have merged them all into this one post.

As Brad says there is a 350Z base map supplied when you install our software.  Most of the pinout info is in the PCLink helpfile, you will also need to look at the "pin functions" list, I have added a screenshot below so you know where to find those.  Note we also have a plugin ECU for this car which might be easier than using a wire-in.  You will also need to access the OEM CAN bus to keep the traction control and instruments working.

yl7APy8.png

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...