Jump to content
Cozcorners

Help with wiring/ pinouts... 2jzgte and thunder

Recommended Posts

I don't know if this is a glitch in the base map but when you load this map into the fury or thunder the injector settings come up as in the picture. 

This has been identified as Danny's problem. 

Should a link dekar not know about this? Does a tuner not go through these settings? 

 

I also not this base map says plug in.. Is there supposed to be another base map for wire in ecu? 

 

20170724_094404_zpsfjc1pjbc.jpg

Share this post


Link to post
Share on other sites

The problem stems in this case from taking a map from an ecu that has not had peak and hold settings available and then loading to a ECU with those settings available.

We try hard to avoid this happening but in this case a setting has got through.

Now we are aware will work to get it fixed so in the future it does not happen.

 

 

Share this post


Link to post
Share on other sites

Yes I would say it is as the settings should be checked but the reality is very had to be sure you have got everything (there are a lot of settings).

Final check should of course be the actual running of the engine which can then highlight an issue and it then becomes a case of finding it.

 

 

Share this post


Link to post
Share on other sites

Yeah was weird as car was running fine until it hit boost 4500rpm then sounded like a mad misfire.. 

To think these settings caused that would have been hard to detect because of it feeling like a mis fire. 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...