MarcD Posted July 10, 2017 Report Share Posted July 10, 2017 looking at interfacing a 3d accelerometer into the G4+ the XC4478 for arduino (https://www.jaycar.co.nz/medias/sys_master/images/8970988781598/XC4478-dataSheetMain.pdf ) is a great little unit.would interface nicely with the 5v from link.just need 3 analog V inputs - the expansion ports only do 2, I haven't got my manual with me at work, so are there 3 available channels on the main harness / plug to use? Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 10, 2017 Report Share Posted July 10, 2017 What ecu do you have and do you know the PCB revision? Vertical acceleration is probably not too useful for most users so you could possibly do away with that if you didnt have enough IO. Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 10, 2017 Report Share Posted July 10, 2017 Another thing I just thought of is right now there is not a good way to log these inputs within PCLink. They would have to be set up as 0-5V GP inputs and would only be logged as a raw voltage rather than in meaningful units. Quote Link to comment Share on other sites More sharing options...
MarcD Posted July 10, 2017 Author Report Share Posted July 10, 2017 is there a plan to enable enhanced graphics for this? I've got the g4+ pnp for Mx5 na 1600 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.