Jump to content
krohelm

AC Load Compensation In Modeled Fueling

Recommended Posts

VE is definitely way different with alpha-n at idle rpm and AC on vs off, and short of a full 4D fuel table I don't see a supported method of working around it.

G4+ ECU Tuning Functions > Fuel > Fuel Corrections > Idle Load Trims > Air Con Trim

amount of time in milliseconds added to the injector pulse width when the Air Conditioning clutch is engaged.

This is the right trim to use, but it's locked to injector millis and thereby traditional fueling.  In modeled alpha-n:

  1. AC turns on increasing demand.
  2. Engine goes lean with stall compensation via IAC solenoid.
  3. Engine dies.

By adding 32.5% to my idle cells in a 4D fuel map I've worked around this, accomplishing stable lambda across AC state transitions; but this should be a supported use case.

Additional context:  http://forums.linkecu.com/index.php?/topic/7096-idle-with-accessories/

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...