Sparkystav Posted July 19, 2017 Report Share Posted July 19, 2017 Hello, im struggling with getting any analog voltage readings from the Link G4+ Fury to the original Dash2 (not pro) using the serial adapter. Everything else seems to work (rpm, temps) but non of the analog voltages. This means I can see coolant/inlet temp, but not oil pressure etc. I have asked on the Dash2 forum already and they suggested Link May have changed a setting(picture attached) Can you help please? My alternative is to buy the CAN interface from them instead but I’d like to get the serial one working. Quote Link to comment Share on other sites More sharing options...
Simon Posted July 19, 2017 Report Share Posted July 19, 2017 Yes the Serial stream has changed on the G4+ from the G4 what I'm not sure on is where the difference is.But there is a note that our old display link will not work on the serial stream of a G4+ Quote Link to comment Share on other sites More sharing options...
Sparkystav Posted July 19, 2017 Author Report Share Posted July 19, 2017 Thanks for the response, am I doomed to it never working or is it just on a different channel so I should keep trying? Quote Link to comment Share on other sites More sharing options...
Simon Posted July 19, 2017 Report Share Posted July 19, 2017 I would expect the data to be there but on looking in the help file it looks like the information is still from the G4Navigation: Technical Terms and Reference > Communications >Long Datastream Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.