Jump to content
lekonna

windows 10, hibernation and crash

Recommended Posts

Hi, 

So there is this pretty annoying thing that has started happening since windows 10 with vipec, if the system hibernates the vts exe crashes when the system wakes up. Any advice here? Its pretty annoying to road tune and then loose all of the data in the log because of this.

I'm running the latest sw i could find on the vipec page.

best regards,

Janne K

vts_has_stpååed.PNG

Edited by lekonna

Share this post


Link to post
Share on other sites

We have had this reported before and I believe it is fixed in the G4+ software but we wont be updating the old VTS software.  You will have to turn hibernate off or maybe standby might work better.

Share this post


Link to post
Share on other sites

Yep the maps can be transferred over they will need to be checked well though particularly if you have pressure sensors calibrated in psi.

It is a case of being connected to the G4+ at the point you open the old V series map and it will convert as it loads.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...