Jump to content
phoenixmsport@gmail.com

ross trigger for rb engine

Recommended Posts

Hi there,

 

i have tuning this rb34 with ross trigger setup and sensors

its makes around 735hp 65kg torgue  at 1.4bar but the problem when i reach 6800 rpm the crank signal goes error count more up to 30-40 time in dyno pull.

my question,

why the link ecu filter its not filtering till i filter it max,there were no changes.

what it can cost?only crank sensor it is trigger 2 getting error at high rpm,the cam side looks fine so far.(is it design faulty from ross,i have check today online they have change the design12 tooth to sharp edge)

i have change sensor priority to trigger 1,still same

is this magnectic sensor not good for higher rpm?or link ecu got filtering issue

so anyone any idea how to make work without error.

 

thank you for your advise

 

Share this post


Link to post
Share on other sites

pheonix what does your cam sensor look like? i had an early ross setup with the curved teeth on the balancer and i had the below style of cam trigger circle with slots. they now run the square tooth crank and the cam is a key hole shaped thing. the earlier cam trigger caused issues due to the balance hole causing false triggering. Ross were very good about the whole thing as they were  not the owners back when these were produced but looked after me with replacement parts. I also found the sensors ultra sensitive to gap if you are to close to the pickup it will cause trigger errors at high rpm. I also moved from the honeywell gt101 to the cherry version was recommended by various people although i never had any issues with the honeywell the cherry is supposedly better suited to the application than the honeywell. i attached a pic of the trigger picking up the balance hole for your reference also. 

 

ross 1.jpg

matt4 problem.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...