Jump to content
chemat

link atom launch control

Recommended Posts

I can help guide you here although the Atom can be a bit limited in this respect.  What would you ideally like to do?  Limit RPM purely based on wheel speed, or do you have something else to consider for launch control like a clutch switch?  Are you trying to build boost or just limit wheel slip?

Share this post


Link to post
Share on other sites

Ok, you still didnt tell me much about your setup and what you want to do but hopefully this example will give you some ideas...

PKaqxZc.png

 

So in this example I have set up a virtual aux to "switch on" when wheel speed is less than 10KMH.  I have assigned this virtual aux to an axis in a GP Limit table, this will give us a 6000RPM limit when the Virtual aux is on and a 10000RPM limit when the VA is off.

I have then set up 4D fuel and ignition tables that are activated by this same VA.  Whenever wheel speed is <10KMH, the 4D fuel will add 10% fuel and the 4D ign will retard ign 20degs.

Share this post


Link to post
Share on other sites

tq for the reply.as we now  atom only have  2 digital input.which wire  need to connect to the speed input to enable this fuction. the rest of your example i can i understand tq.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...