Jump to content
Sign in to follow this  
amg

Weird PWM related behaviour

Recommended Posts

Hello

I have an intercooler pump PWM wire on Aux 2 set to GP PWM with condition of IAT > 10C. When I switch the ignition (pos. 2 pre-crank), the pump start circuilating the water and all seems good.

However, when I switch off the ignition, the pump continues to operate. So I'm thinking the pump is the culprit and rewire the relay to feed on ingition switch (as well as battery) unlike before when it fed on battery only.

Do the same test - all good, I can switch the pump off now on the key. So I move to other area of the ECU config and want to temporarily switch the pump off from within the ECU, so set the IAT > 100C but now the pump won't stop.

I saved and uploaded the file, I played with various frequencies but my success has so far been intermittent.

It appears I either have a faulty pump (it is new) or PWM signal keeps coming even when conditions are changed.

I supposed I could scope the signal coming out of the Aux 2 and see if it's changing with conditions but other than that, is there a log I can check or monitor the output within PCLink?

Any ideas are welcome.

 

Thanks.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...