Jump to content
Howard Coleman

2 unrelated problems: Log Analysis appears as a blank white space and Knock System now generating zeros

Recommended Posts

after working fine until today all i get is white space where my Log Analysis should appear. i believe i have tried just about everything. after clicking on and calling up a specific log in spite of seeing a blank white space i am able to do a Mixture Map and Navigator. the Parameters appear.

also, my two Knock Sensors (newer style Bosch 2 rotor motor) stopped generating anything but zeros a couple of days ago. since each stopped at the same time i am concerned that something malfunctioned in my V88. settings have been verified "Internal"

would greatly appreciate any suggestions.

 

Share this post


Link to post
Share on other sites

Post a log and your map and I will take a look.

Can you give more detail about your problem "all i get is white space where my Log Analysis should appear".  Do you mean the time plot and other logging views are missing - or are the views still there just no data showing?

Share this post


Link to post
Share on other sites

Thank you for your reply.

i tried to post a jpeg of the screen unsuccessfuly however it is easy to describe.

Logging 1 page is entirely blank. no time data, absolutely nothing but white.  when i right click on it i get "New View." with a number of options starting w Run Time Value List, which leads to Run Time Value List Properties. other items are Digital Gauge etc.

if i go back to Logging and click Play and look over at my  Parameter List i see all the data moving but nothing but white on the Logging part of the page.

my V88 has worked fine (love it) and this is something that just happened Friday. i have attached a log

 

Log 1-11-17 3;22;45 pm.llg

Share this post


Link to post
Share on other sites

i connected my laptop to the V88, turned the key on and did a log. i was able to generate a log and save it to my files. i can generate a Mixture Map and Runtime Values... the only thing not seeming to work is seeing the log on my screen. nothing but blank white space. 

Share this post


Link to post
Share on other sites

THANK YOU ADAM! i don't know what i did to delete the log view but your new Layout solved my problem. i wish you a wonderful Monday:)

do you have any ideas as to why my Knock readings are zero from both sensors? previously they were reading fine. i have two late model Bosch sensors and am of course running Link/Vipec internal.

thank you,

 

Howard

 

Share this post


Link to post
Share on other sites

Hi Howard

Looking at the map I think the issue is that you have Cyl1 and 2 Knk Level Gains at 0

I would put these at 1 and adjust as required to get suitable levels and even across the cylinders.

 

Regards

 

Simon

 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×