millsys 25 Posted November 18, 2017 Report Share Posted November 18, 2017 hi everyone new to this so bear with me i have a 2010 mini cooper s that i have fitted a monsoon to as a piggy back controller to just control 4 injectors boost and my meth system but i’m struggling to get the trigger 1 to work the car has a 58 tooth trigger wheel with a space of two teeth filled in what do i need to do to get it work thanks jason Quote Link to comment Share on other sites More sharing options...
Grant Baker Posted November 18, 2017 Report Share Posted November 18, 2017 That's a 60-2 trigger pattern. millsys 25 1 Quote Link to comment Share on other sites More sharing options...
millsys 25 Posted November 18, 2017 Author Report Share Posted November 18, 2017 does that include the two that are part of the big one Quote Link to comment Share on other sites More sharing options...
Grant Baker Posted November 18, 2017 Report Share Posted November 18, 2017 The 60 is the number of total teeth including "missing". The 2 that are built up are actually known as "missing teeth". So you need to set "Multi tooth/missing" as the mode and Trigger priority as Trigger 1 in Trigger setup... Trigger 1 setup - Multi tooth posn as Crank... Tooth count as 60.... Missing teeth as 2 HTH? Quote Link to comment Share on other sites More sharing options...
Adamw Posted November 19, 2017 Report Share Posted November 19, 2017 Note, if you are not using a cam trigger with this then trigger 2 sync mode will also need to be set to "none" for it to work. Quote Link to comment Share on other sites More sharing options...
millsys 25 Posted November 19, 2017 Author Report Share Posted November 19, 2017 thanks peeps all working now Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.