Jump to content
bmt

BAP sensor readings

Recommended Posts

Hi there, question on my new Vipec - I have 2 setups for turbo polaris - and the new vipec I have set up shows the Bap sensor reading - which comparing to my other unit is incorrect- the MAP sensor is reading a bit high as well - the other setup I have is showing 93 .  Can you advise me of how to get the BAP sensor recalibrated - I'm assuming this is the internal VIPEC bap sensor.

 

 

image.thumb.png.e2ff4663b664fae791197f9fa8608995.png

image.png

Share this post


Link to post
Share on other sites

On the configuration  page, check the Baro sensor is still set to "marine".  If it is and it still reads incorrect then the sensor inside may have failed and you will need to contact tech support. 

Share this post


Link to post
Share on other sites

Thanks, Adam - its confirmed to be in Marine mode - I took my Vipec #1 and swapped between sleds - I get the same indications from swapping to a different sled - Ill contact tech support next week. Any body in specific to chat with? Thanks for the timely reply!

Happy Holidays,

 

image.thumb.png.a5dd279a93d7d6b79a3b8b1fcd44d6a5.png

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...