Youngtimer Posted January 14, 2018 Report Share Posted January 14, 2018 Hi all, i am looking for GM 1Bar Map Sensor Calibration Map Sensor GM Part Number 16137039 Atom 2 Ecu Thank you Marc Quote Link to comment Share on other sites More sharing options...
ClintBHP Posted January 14, 2018 Report Share Posted January 14, 2018 It's actually a 1.05 bar sensor and the same as Link used to use so select the 1.05bar Link calibration and check the MAP reading with the ignition on but engine stopped is the same as the inbuilt Barometric sensor (MAP=BAP). Quote Link to comment Share on other sites More sharing options...
Youngtimer Posted January 14, 2018 Author Report Share Posted January 14, 2018 Thanks for your answer, where should i look, i only found 1.15bar Link in the MAP Sensor calibration list. Marc Quote Link to comment Share on other sites More sharing options...
ClintBHP Posted January 14, 2018 Report Share Posted January 14, 2018 Sorry Marc my Mistake, I was thinking of the Delphi version. The actual calibration from Bosch for that sensor in my notes is: 15Kpa = 0.21v 100Kpa = 4.75v it will go to 1.05bar and almost 5v Again the key to check its right is that it matches the barometric sensor. Quote Link to comment Share on other sites More sharing options...
Youngtimer Posted January 14, 2018 Author Report Share Posted January 14, 2018 Thank you, check that it matches the Baro Sensor. Marc Quote Link to comment Share on other sites More sharing options...
ClintBHP Posted January 14, 2018 Report Share Posted January 14, 2018 Yes the Link ECU has a 1 bar barometric sensor on the PCB (BAP) with the engine not running it should read the same as your MAP sensor. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.