Ted Posted January 18, 2018 Report Share Posted January 18, 2018 Hi there, i am new to the Link ECU. I just bought the G4+ plug and play V10 Part#WRX107 for my Subaru Forester MY06 2.5XT European. i would like to ask because inside the ecu it has only 2 jumpers and the picture demonstrates that i have to attach one jumper to horizontal on the 2007 numbers and 2 jumpers vertical at the other 2007. but there is only 2 jumpers in total inside the ecu... can someone advise please? i would be greatfull. Ted Quote Link to comment Share on other sites More sharing options...
Scott C Posted January 18, 2018 Report Share Posted January 18, 2018 It sounds like you're missing a jumper. You should have (1) for the three-pin and (2) for the four-pin. You'll have to source or make a replacement before you can run the ECU. Was this purchased second-hand/used? Ted 1 Quote Link to comment Share on other sites More sharing options...
Ted Posted January 18, 2018 Author Report Share Posted January 18, 2018 Thank you for your immediate answer! No i bought it 3 days ago from the Greek seller in Greece Athens i haven't put it on the car yet due to the missing jumpers. and why it was missing from inside ? the ecu was fully wrapped and closed please advise Quote Link to comment Share on other sites More sharing options...
Simon Posted January 18, 2018 Report Share Posted January 18, 2018 Most likely a mistake during packaging missing putting one jumper in. Make sure it hasn't dropped off in the bag and might still be in there. The jumpers are relatively common and often used in PCs so a very good chance one can be found locally. Ted 1 Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted January 18, 2018 Report Share Posted January 18, 2018 does the unit have the 3 pins in a row style or the 4 pins in a square? If it is just the 3 pins it will have one jumper. if it is 4 pins it will have 2 jumpers. All the ones i have dealt with for that specific model have had the 4 pin square with only 2 jumpers. Quote Link to comment Share on other sites More sharing options...
Ted Posted January 18, 2018 Author Report Share Posted January 18, 2018 13 minutes ago, Brad Burnett said: does the unit have the 3 pins in a row style or the 4 pins in a square? If it is just the 3 pins it will have one jumper. if it is 4 pins it will have 2 jumpers. All the ones i have dealt with for that specific model have had the 4 pin square with only 2 jumpers. it has both... 16 minutes ago, Simon said: Most likely a mistake during packaging missing putting one jumper in. Make sure it hasn't dropped off in the bag and might still be in there. The jumpers are relatively common and often used in PCs so a very good chance one can be found locally. yes i will do that! i appreciate! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.