Jump to content
kristophersky

Rb26dett trigger setup issues

Recommended Posts

It's come to the time to try and start my car after Binning off the old Cas sensor I'm going for a 36 - 1 crank pickup and a one tooth pick up for the cam. I've spoken to my tuner he has talked me through the settings to put in the ECU I'm using to wire reluctor sensors from a Ford Zetec engine. When I crank the engine over I'm getting a green yes next to trig one but a white no next to trig 2 no RPM showing on the ECU. I have opened up the trigger scope and I'm getting a signal on trig one but nothing on trig 2 I've removed the sensor and passed metal past it and I'm getting a signal on the scope. Has anybody got any ideas to what this could be my clearance on the crank is 20 thou and 26 on the cam 

Share this post


Link to post
Share on other sites
2 hours ago, ClintBHP said:

Can you post the pclr file please.

What material did you use on the cam for the trigger ?

I used 5mm mild steel that I welded onto the cam washer I'll upload the file later when I'm with my laptop 

20180119_203050.jpg

20180121_152525.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...