BCNR33Zed Posted February 1, 2018 Report Share Posted February 1, 2018 Hi, Can someone help me to find some data sheets for my ID2000 or someone has a screenshot of the configuration for those injectors? Thanks Quote Link to comment Share on other sites More sharing options...
ClintBHP Posted February 1, 2018 Report Share Posted February 1, 2018 Taken from: http://injectordynamics.com/injectors/id2000/ Fuel Pressure Offset Slope (psid) (µsec) (cc/min) 8 Volts 10 Volts 12 Volts 14 Volts 16 Volts 43.5 1455 950 680 495 375 2225 45.0 1475 965 690 500 380 2255 50.0 1540 1020 720 525 405 2365 55.0 1605 1065 750 550 430 2470 60.0 1680 1105 780 580 455 2575 65.0 1750 1140 810 605 475 2680 70.0 1825 1175 840 635 495 2780 75.0 1895 1220 880 665 505 2875 80.0 1965 1270 925 690 515 2970 85.0 2050 1320 965 715 520 3055 90.0 2160 1360 995 750 540 3140 95.0 2290 1395 1015 780 565 3225 100.0 2410 1430 1035 810 590 3300 105.0 2515 1485 1060 830 605 3375 110.0 2620 1555 1095 840 615 3445 115.0 2750 1620 1135 855 630 3515 120.0 2935 1675 1175 875 665 3580 125.0 3175 1720 1220 900 715 3645 130.0 3435 1755 1265 925 755 3710 Quote Link to comment Share on other sites More sharing options...
BCNR33Zed Posted February 1, 2018 Author Report Share Posted February 1, 2018 I've already saw that table for the Dead Time, but, is only for 8/10/12/14/16 volts. I'm taking the 50psi data, but on the Link configuration there are more values for the battery voltage.. Start from 6Volts to 15Volts. For the Short Pulse I can't find anything also. Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 1, 2018 Report Share Posted February 1, 2018 There is injector data already formatted to drop straight into G4+ on ID’s website, look in the plug and play section. Edit; here:http://help.injectordynamics.com/support/solutions/articles/4000074340-link-engine-management Quote Link to comment Share on other sites More sharing options...
BCNR33Zed Posted February 2, 2018 Author Report Share Posted February 2, 2018 thanks but that ID2000's data are for 400kpa of base fuel pressure.. I'm searching some for 350kpa of base fuel pressure Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted February 2, 2018 Report Share Posted February 2, 2018 You are way over thinking this. Just stick the 400kpa data in there and raise your base to match. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.