Jump to content
Fasters

idle problem

Recommended Posts

hi , honestly im new in tuning world , basically i've done study about link ecu software .. now i have problem about my car . im build a engine with agresive camshaft with dual pattern design . vacuum in intake plenum very weak .. around -20 to 0 kpa in my vacuum gauge apexi .. so , which one should i use for best setup in fuel and ignition load axis ? tps or mgp is better ? my engine is Natural aspirated .

by the way , tps load and mgp load give different power gain or not ? i mean , example .. use tps power out 100whp  , then if using a map sensor , power output 120whp .. its true or not ? anyone can  give me some idea n advice .. thanks

Share this post


Link to post
Share on other sites

To give a little more detail, fuel settings should be like so:

BGmExJR.png

TP would be the best option for your ignition table axis also.

7 hours ago, Fasters said:

by the way , tps load and mgp load give different power gain or not ? i mean , example .. use tps power out 100whp  , then if using a map sensor , power output 120whp .. its true or not ? anyone can  give me some idea n advice .. thanks

No, they would all potentially give you exactly the same power at WOT but the idea is you want to pick the strategy that will give you the best ability to control fuel mixture repeatably over a wide range of operating conditions.  A TP load axis is usually the best option for an engine like yours.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×