Jump to content
Sign in to follow this  
Twinturbotr7

What brand coolant temperature sender

Recommended Posts

Hi all I'm new to this and will be buying a link atom or monsoon sometime soon ,in the meanwhile I'm sorting out all the senders I need etc , I'm building a  rover v8 twin turbo But I need modify the inlet manifold ,part of this in tails moving the position of the coolant temp sender, I will need to weld a new boss onto the manifold and tap it for a temp sender ,my question is ,should I use the original 2 wire rover sender or should  I upgrade  to the  link NTC12 temp sender ? I need to make my desision on this as need to tap the boss I've made , the rover one has a diffent thread to the link one so it's not a case of changing my mind on this later it need to be sorted now ,also would it be easier to set the link ecu up with the link sender ?

thanks Nick

Share this post


Link to post
Share on other sites

any two wire coolant temp sensor will work.  

The link NCT12 is just a Bosch style sensor with a m12x1.5 thread.  

As long as you go with that thread or 1/8npt you should be fine finding a temp sensor later on.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...