rich Posted April 4, 2018 Report Share Posted April 4, 2018 can anyone help me out with this, I'm using an ej255 Subaru motor, standard bore and internals, and a bosch wideband knock sensor,and this is on a g4+ ecu. should I be using the 6khz narrowband freq. channel, like the oem sensor, or the 4-10khz wideband sensor option, because of the bosch sensor? I have read the help file and searched around but I'm still abit unsure, any advice would be greatly appreciated as I've tried logging a few options and its not obvious which is producing less noise? thanks a lot, I know its been asked before I'm sure but I'm stuck Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted April 4, 2018 Report Share Posted April 4, 2018 Per the help file: with bosch aftermarket sensor use 6khz rich 1 Quote Link to comment Share on other sites More sharing options...
rich Posted April 5, 2018 Author Report Share Posted April 5, 2018 thanks buddy, that's what I was using anyways good to know its correct Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.