Jump to content
vteckz

350 GM - Trigger Pickup

Recommended Posts

Hi Guys,

We have a G4+ Atom which we are wanting to install into our boat.

It is a new GM 350 motor with standard GM TBI fuel injection. The current motor does not have a crank sensor however, the ECU only relies on the distributor unit for pickup, and a live +12V on cranking from the starter.

Will we be able to set the trigger up with this? Or will we need to retrofit a crank angle sensor and run the wiring?

 

THanks

Share this post


Link to post
Share on other sites

Its likely it will have a Optical/Hall sensor with a 8 tooth chopper disk, Which will be ok for Distributor ignition and group fuel. 

Share this post


Link to post
Share on other sites

Thanks - so this would be setup as Optical / Hall, priority on trigger 2 as cam? 

What should I set the cam pulse to? Unfortunately the Atom does not have a trigger scope.. which makes things a bit harder.


Thanks

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×