Tim Hardisty Posted April 10, 2018 Report Share Posted April 10, 2018 We have a customer who would like to use a Toucan to activate antilag from the touchscreen, in the same way as we can activate launch control. The ALS arming options do not include CAN DI's, so we have tried using a CAN DI to control a virtual AUX output, and then to use that virtual AUX as the ALS trigger. It works, but I'm told the behaviour is back to front - it defaults to ON when the CAN DI is not asserted. I will be in a position to try this for myself tomorrow on the bench but, in the meantime, can anyone suggest: how to invert the logic. I can't see this anywhere or another way to achieve this? Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 10, 2018 Report Share Posted April 10, 2018 The setup below should work as expected. You can invert the behaviour by changing the highlighted field to a 0 instead of 1, but I would expect 1 to be correct. Tim Hardisty 1 Quote Link to comment Share on other sites More sharing options...
Tim Hardisty Posted April 10, 2018 Author Report Share Posted April 10, 2018 Thanks Adam - we'll give that a go Still learning PCLink lol Quote Link to comment Share on other sites More sharing options...
Grant Baker Posted April 12, 2018 Report Share Posted April 12, 2018 I've set this up on 2 cars now and it works fine Tim. Done it exactly as Adam says, but I used Can DI8 Tim Hardisty 1 Quote Link to comment Share on other sites More sharing options...
Tim Hardisty Posted April 12, 2018 Author Report Share Posted April 12, 2018 Another tuner has also done this today with 100% success Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.