Jump to content

Dash2pro problem


StijnFSP

Recommended Posts

Hi ,

i wired a dash2pro in and it works but only thing i cant get the ecu online on pc linkwith the dash connected 

setup is dash2 pro to can1 of a wrx v7-9 setup cansettings as in help 

When i disconnect the dash pc link gets online right away 

do i need to use can 2?

Link to comment
Share on other sites

The problem is probably the cable that you have used to connect the dash to the CAN port has the RS232 wires in it.  CAN1 port has RS232 pins in it, so if it "sees" anything connected to the RS232 pins then it will interrupt the PC Comms.  The easiest fix will be to move your CANPCB cable to CAN2 as that has no RS232.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...