Jump to content
CRSKmD

unable to connect R34 GTT G4+ PnP

Recommended Posts

Hi all, new link owner but unable to get it to connect to PCLink.

ECU Link G4+ R34 GTT

Error:  "Unable to connect to the ECU but USB connection is present. Please cycle the power to the ECU."

Checked in device manager and am able to see the Link on COM port 5. if i pull the USB plug out it disappears  from list

when ignition is on there is a green led that lights up on the ECU i can see through a screw hole.

attached are the voltages seen at each Pin when Ignition is on.

any more information required please let me know.
 

C34TranslatedPinoutECU-1 - VOLTAGES 1.jpg

C34TranslatedPinoutECU-1 - VOLTAGES 2.jpg

Share this post


Link to post
Share on other sites

Hi, thats a weird one.  Normally that unable to connect message only pops up if there is no power but the LED and your testing suggests that is ok.  Can you confirm there is nothing plugged into the CAN1/RS232 socket?

Share this post


Link to post
Share on other sites

Not that I can see. The unit is a plug and play inside the stock housing. The place I bought the ecu from put it in the stock ecu housing for me.

 

There is the round plug with the USB adapter and an expansion loom coming out 

Share this post


Link to post
Share on other sites

update. the baud rate was set to 19200
changed to each level power cycling each time and it worked at 115200
set to Auto 624k and its all good

Share this post


Link to post
Share on other sites

Ok, good work.  I too notice the 3 lowest baud rates dont work with USB (they might be for the old serial connection option).  I will get engineering to take a look at that next week to either fix it or remove those options.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...