Adamw Posted June 5, 2017 Report Share Posted June 5, 2017 The trigger scope that you posted earlier appears to match our "S52" trigger mode. Set it up like below: You will need to use a timing light to determine the trigger offset. Although I think it will still work ok in this case, your waveform on trigger 2 looks a bit distorted, I have seen this before with a S50B32 and it was caused bolt heads behind the cam sprocket too close to the sensor. You might have to change those bolts to stainless or maybe machine the heads smaller or something if it causes trigger errors. It should look more like this: Quote Link to comment Share on other sites More sharing options...
OlegD Posted June 5, 2017 Report Share Posted June 5, 2017 Thank you very much AdamW for your prompt response. I'll try this setting in 1-2 hours. I agree with you, it may be possible that the bolts affect the shape of the signal. But for now this part of the signal lies below the zero line. I'll replace the bolts later. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.