Jump to content
exileperformance

Automatic Trans Control (4l80e)

Recommended Posts

Has anyone setup ecu to control automatic shift functions? I have search a little and haven't found much. I would think it would be a matter of getting inputs and outputs setup, if someone has something I can work off of that would be great or I will end up smoking a few transmissions but I will share the results lol. Thanks for any help.

Share this post


Link to post
Share on other sites

I have been running shift solenoid control for a while now (BTR 4 speed), with torque limiting during shifts as I don't bother with line pressure solenoid control. Works great! 

Obviously factory style automatic shifts would be a challenge to set up and time consuming, but setup for full manual control is simple enough.

Share this post


Link to post
Share on other sites

Id be interested in this as well, I'm currently running a Re4r03b gearbox with a R34 Skyline trans controller. It seems to work but would be much nicer to be able to get the Link to do the control. 

Share this post


Link to post
Share on other sites

I think you could run line pressure based off the map sensor. and I feel like there will be some setup time but I think I can make it shift like stock. the 4l80e has 2 solenoids A and B for first gear A needs power for second all are off, for third B is on and for fourth both a and b are on. The you have the lockup and the line pressure.

 

Share this post


Link to post
Share on other sites
4 hours ago, exileperformance said:

I think you could run line pressure based off the map sensor. and I feel like there will be some setup time but I think I can make it shift like stock. the 4l80e has 2 solenoids A and B for first gear A needs power for second all are off, for third B is on and for fourth both a and b are on. The you have the lockup and the line pressure.

 

If this is all you need and assuming you will just be using buttons to initiate a shift then this should be doable with the generic GP output tools. 

Share this post


Link to post
Share on other sites
15 hours ago, exileperformance said:

I would like to be able to setup a tps and rpm table to control shifts. is that possible?

 

Sorry, no we dont have any functionality that will do this cleanly.  

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...