Ken Dunkley Posted July 24, 2018 Report Share Posted July 24, 2018 Hi- Are any of the G4+ range capable of controlling the GM 4L60e trans as well as the engine { not a chev } . Or does anyone know if i can use the LT1 computer to work the trans and the Link will run the motor ? Quote Link to comment Share on other sites More sharing options...
exileperformance Posted July 24, 2018 Report Share Posted July 24, 2018 I'm messing with a 4l80e, you can make them shift but i'm not sure we have the tables we need to make it shift like factory ecu. Quote Link to comment Share on other sites More sharing options...
Ken Dunkley Posted July 24, 2018 Author Report Share Posted July 24, 2018 Hi- Thanks for the reply - I see in the 4L80 post your question about TP sensor being used to control line pressure - Hope this works out . Please keep us informed with how youre going with the project - My only alternative is to buy a stand alone controller for about $500US . Plus frieght plus gst . Itll work out about $1000 bucks !!!! . Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted July 24, 2018 Report Share Posted July 24, 2018 you could also look into powertrain control solutions. They offer a unit with harness for 4l60/4l80 I believe the unit is the pcs2000. But I also think that this unit my have ended life and has been replaced by a newer unit. Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 25, 2018 Report Share Posted July 25, 2018 Yeah sorry, this is not something that we support at present. It is on the wishlist but quite a way down in terms of priority. I dont have much experience with the standalone controllers. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.