Jump to content
sama

WRX104 -- Wideband install with expansion loom

Recommended Posts

Hello everybody,

I ordered the expansion loom to be able to connect an AEM wideband to the Link WRX104+ got the loom today and checking wiring I see there is an issue. 

Instructions say this: AN11 or AN12 

image.png.32e6b1019b89e83ddb21c326b609c89d.png

 

Checked pinout

image.png.f77742528a41321eb7f29750a4af9c2f.png

now I see that lambda 1 is at AN11, and coincidentally it doesn't behave properly cannot see it move or change from 7.44 AFR. Could this be the issue? 

image.png.16a4b70e879e2925533450852e54638e.png

Share this post


Link to post
Share on other sites

An volt 11 & 12 on the expansion connector is correct as per the top photo.  The second picture you show of the "pin functions" list is for the 2007 ECU, not the 04-06.

So AN Volt 11 will work provided your wiring and cal table is correct.  You can attach your map if you want us to confirm the cal table is set up correctly.

Share this post


Link to post
Share on other sites
4 hours ago, sama said:

here you go adam. so I left on channel 11 what I found on the software no tampering which is a lambda 1 with a "default" table, I added on channel 12 the aem wideband I have, but it displays lambda not afr so I suppose the table needs to be changed. 

You cant have 2 inputs assigned to Lambda 1.  Turn off AN Volt 11.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...