Jump to content
V8KILR

Traction Control settings

Recommended Posts

Currently traction control can only be deactivated below 25 kmh. I'm using launch control for 1st gear and I only want the traction control in 2nd gear and higher. This 25 kmh limit is too low for the drag racing I do, where I'll get well over 100% slip up to 50kmh or higher with the drag tires. Can this limit be increased to say 100 kmh so I can stop traction control kicking in, in 1st gear.

The current max slip percentage is 50% which is too low for drag racing. Can this limit be increased to say 500% to allow it to be used in 1st gear if required. If the request above is actioned, there is less need for this request.
 

Share this post


Link to post
Share on other sites

Yep, both good thoughts although I havent heard of it being used in a drag racing situation before, Im not sure if controlling slip to 500% is going to work.  I can see value in having the speed lockout configurable for higher speeds.

As a workaround if you have a spare aux output and spare DI, I think we could connect the two together and use the aux output to disable/enable the traction DI under whatever conditions you like.  

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×