CMSport Posted September 1, 2018 Report Share Posted September 1, 2018 Hey guys I'm feeling a little desperate... I've just been working on a car with a Monsoon ECU and had the battery disconnected and loom unplugged. Everything was running fine when I drove it in and nothing fundamental was changed only wired in two standalone gauges. When I plugged the ECU back in the engine cranks but won't fire. This is the second time this has happened. The first time I did nothing in particular to resolve the issue and it started again and ran faultlessly for a month or so. Am supposed to be racing tomorrow!! Hence the desperation Any help at all would be much appreciated! I'll trailer the car to the track if it won't start in the morning and keep trying Quote Link to comment Share on other sites More sharing options...
Ducie54 Posted September 1, 2018 Report Share Posted September 1, 2018 Pull the ecu plug off and look down the plug to make sure all the pins are located correctly. While watching the triggers in the run time tab F12 See if the triggers box show green while cranking. Quote Link to comment Share on other sites More sharing options...
CMSport Posted September 1, 2018 Author Report Share Posted September 1, 2018 Thanks I'll give that a go in a few mins! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.