Jump to content
Sign in to follow this  
CMSport

Engine won't start after disconnecting loom

Recommended Posts

Hey guys I'm feeling a little desperate... I've just been working on a car with a Monsoon ECU and had the battery disconnected and loom unplugged. Everything was running fine when I drove it in and nothing fundamental was changed only wired in two standalone gauges. When I plugged the ECU back in the engine cranks but won't fire. This is the second time this has happened. The first time I did nothing in particular to resolve the issue and it started again and ran faultlessly for a month or so. 

Am supposed to be racing tomorrow!! Hence the desperation

 

Any help at all would be much appreciated! I'll trailer the car to the track if it won't start in the morning and keep trying

Share this post


Link to post
Share on other sites

Pull the ecu plug off and look down the plug to make sure all the pins are located correctly. 

While watching the triggers in the run time tab F12 See if the triggers box show green while cranking.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...