Jump to content

CAN output protocol options


Chi-Town

Recommended Posts

I did a quick search and didn't find an answer so here I am.

I'm looking at a set of Speedhut gauges that use a CAN J1979 protocol in order to keep a factory looking dash.

Does the G4+ Fury have the ability to have the CAN output set to this protocol?

Thanks for your time

 

Link to comment
Share on other sites

J1979 is just a PID definition standard for OBD2.  So yes they will work with our OBD2 output.  The exception is their oil temp, oil press and trans temp gauges say "only work with GM vehicles" so they may use some different PIDs that the standard set.

Below are the PID's that our OBD2 outputs:  

FMswZKn.png 

Link to comment
Share on other sites

2 hours ago, Adamw said:

The exception is their oil temp, oil press and trans temp gauges say "only work with GM vehicles" so they may use some different PIDs that the standard set.

 

2 hours ago, Chi-Town said:

Perfect, the gauges use the GM PIDS so I'm good.

No, Im saying the 3 specific gauges that they state "are only compatable with GM vehicles" probably wont work.  All the others like RPM, speed, coolant temp etc will.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...