Jump to content
jacky4566

#WRX107+ Support for EZ30 Swap

Recommended Posts

Hi team,

New user here from the Megasquirt world. Came for the DBW, stayed for the cruise control features :P

I hope my question is clear here. I have a 2006 WRX that I would like to swap in the Subaru EZ30. Will the #WRX107+ ECU support this engine?

It appears to me that the #WRX107+  specific ecu is just the Xtreme stuffed into an application specific box. So I should be able to re-wire those extra connections at the engine harness and bingo. Easier than doing a full wire-in kit and cheaper since i don't need the connectors now.

Just looking at the software it lists 8 ignition and injector outputs so in theory i can simply change the output to the corresponding engine component, correct?

Therefore:

Purge becomes INJ 5

Cruise becomes INJ 6

Engine Fan becomes INJ 5

AC Clutch becomes INJ 6

Sounds like a plan?

Share this post


Link to post
Share on other sites

Yep it can be done no worries.  There is aux 11,12,13 on the expansion port and aux 7 & 8 that were used for the tumble valves that you could use to replace some of the repurposed inj/ign outputs.  Triggers/cam sensors/VVT etc should be pretty much directly compatible.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...