Jump to content
goyo

help, timed outputs

Recommended Posts

I want to put a switch of 2 positions, to use 2 inputs and make 2 timed outputs to feed the mass of 2 relays.
Do the entries have to be analog or digital? I do not know how I have to do to do timed.

regards
Goyo

Share this post


Link to post
Share on other sites

So to confirm, you have a switch with 2 positions (on/off), and you want 1 aux to turn on for a set time when the switch is switched on, then a different aux turned on for a set time when you switch off?

Share this post


Link to post
Share on other sites

if I have a switch on and off, when I activate the antilag that is with the same switch I activate a timed output 2 seconds and when I turn off I activate another output 2 seconds.

Share this post


Link to post
Share on other sites

Ok, set up below.  Aux 1 will give a 2 second pulse when DI5 is turned on, Aux 2 will give a 2 second pulse when DI5 is switched off.  Aux 2 will also give a 2 second pulse at key-on to make sure the valve? is closed.  If you dont want a pulse at key-on like this then you can add a 3rd condition "RPM>500".

nCbl3Xy.png

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×