Jump to content
lito

WrxLink 6000rpm missfire/trigger issue

Recommended Posts

Hello, I am experiencing an issue with an ecu I have just bought and installed. The car is a 2003 wrx sti running the ver 7-9 plugin link g4. I am experiencing an issue where the car cuts out at around 6000rpm under load, but will rev to the normal 7500rpm limit when the car is stationary.

I am suspecting it to be a triggering issue and the error count jumps up when the misfiring happens. AFR gauge isnt wired into ecu but they hover around 11-11.5 in the petrol scale under load. 

 The car runs fine apart from this issue and was running completely fine on the stock ecu.

I'm  just wondering if anyone could take a look at the log and help me figure out whats going on.

sti log misfires a.llg

sti log misfires.llg

AA 2003 sti e85.pcl

Share this post


Link to post
Share on other sites

Yes, you have definite signs of trigger error.

Try dropping your trigger 2 lockout to about 4000 to see if that helps.

Also, both your trig 1 and 2 arming thresholds are quite high.  try dropping them down to the values in my example below.

Sr65VSa.png

 

86Wxhuj.png

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×