Jump to content
tiago

Subaru Sti V6 - Advice about drive the car using the base map with some mods

Recommended Posts

Hey guys, I'm looking for some advice about drive the car to the shop to get a tune.
First I need to drive 7km only using the downpipe to get my exhaust finished. Later more 35km to the shop to get a tune.

Not sure if it will be safe and don't wanna take the risk.
The mods that I have is:
- Catless downpipe
- IAG AOS Competition
- Mac 3 ports boost solenoid
- Aftermarket air filter
- 3bar link map
 

Did a log and drove back and forward inside the garage and sometimes the AFR looks hi.
Could it bring me problems if I drive slow and not boosting?

Also after touch the throttle the idle status shows (Hold - RPM Lockout) and the RPM stay around 1500. I tried to solve it but I'm not too confident to do it myself and think will be not a problem drive like that right?

image.thumb.png.b15dc4cf0966efadccdab1b4d8b8bf4f.png

Subaru TypeRA V6.pclr

Log 2018-10-22 5;23;44 pm.llg

Share this post


Link to post
Share on other sites

For the idle control, adjust the RPM lockout to 1000RPM, this is not a proper fix but will allow the idle control work.  Your AFR doesnt look bad in the log but it was only really idling, its more important what happens with a little more load on it.  To add more fuel you can adjust the master fuel setting, most likely bump it up by 1 or 2 will be enough.

In any case, provided you drive it lightly everything will be fine.

QrQwall.png

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...