Jump to content
BlackBeautyGermany

G4 storm 8 injector setup

Recommended Posts

Hello,

 

i think i have problems in my fuel setup.

I want to use 8 high resistance injectors on 4 injector drives. The configuration is group staged. 4 injectors at the head and 4 before the individual throttle body for maximum power.

Is it possible to control this at the Link without a resister pack?

Share this post


Link to post
Share on other sites

Hello,

 

i think i have problems in my fuel setup.

I want to use 8 high resistance injectors on 4 injector drives. The configuration is group staged. 4 injectors at the head and 4 before the individual throttle body for maximum power.

Is it possible to control this at the Link without a resister pack?

Share this post


Link to post
Share on other sites

Yes that will be fine.  The injector drives are good for 5A continuous each, so you can probably have 4 or 5 common high impedance injectors per drive.

 

Edit, I found you had posted in both G4 and G4+ sections so moved it here.

Share this post


Link to post
Share on other sites

As I said in my reply above, it is fine to connect two injectors in parallel direct to drive. 7ohm load is only going to need 2A, the drives can supply 5A.

You do not need any resistors.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×