Jump to content
JaiKai

canbus for two lambda modules

Recommended Posts

I have a Nissan 300ZX TT that has a G4+ ECU and two Link Lambda modules.

Trying to set these up myself but i cannot get the ecu to detect the modules attached to the can bus.

All i get is these errors shown from the realtime values screen.

The cable has two connections and has a 120R resistor at the end.

I've tried just plugging in one of the modules but still cant get it to detect.

 

2018-10-28 14.35.58.jpg

Share this post


Link to post
Share on other sites

looks like i've managed to solve this myself thankfully.

After i sense checked all my connections and double checked the canbus cable short loom that connects to the ecu i discovered

that the wiring is all wrong compared to pictures i've seen online.

So i picked the cables off and put them in the proper locations and hey presto its working.

Just shows you you shouldn't trust ebay and double check the wiring connections when buying cables that are not oem.

 

 

2018-10-28 18.12.01.jpg

2018-10-28 18.23.39.jpg

Share this post


Link to post
Share on other sites

i've messaged the company i bought it from and advised them to change the listing.

They state on the listing that its for the Link G4+ but don't mention you need to modify the cable for it to work properly.

 

Share this post


Link to post
Share on other sites

i've messaged the company i bought it from and advised them to change the listing.

They state on the listing that its for the Link G4+ but don't mention you need to modify the cable for it to work properly.

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×