Matt Dunn Posted November 11, 2018 Report Share Posted November 11, 2018 Hi there, We are wiring a car that has two lots of fuel pumps, Is there any reason I cannot assign two outputs as fuel pump, Aux Out 7 and Aux Out 8. Will they both work the same, or does it get confused if you assign two outputs the same function.? Quote Link to comment Share on other sites More sharing options...
Adamw Posted November 11, 2018 Report Share Posted November 11, 2018 It definitely wont give expected behaviour with two auxes assigned to the same function. Setup below is how I would do it. Aux 8 is a GP output with the condition aux 7 = on. Aux 8 will then always follow aux 7 - do the normal prime etc Quote Link to comment Share on other sites More sharing options...
Grant Pratt Posted November 15, 2018 Report Share Posted November 15, 2018 Do you want the second pumps to come on only when needed or on all the time like Adam has done? Quote Link to comment Share on other sites More sharing options...
Matt Dunn Posted November 16, 2018 Author Report Share Posted November 16, 2018 All the time like shown above is what we are after, so will just use 1 as FP and one a GP. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.