Jump to content
Ryan Jerard

Can Lambda problem

Recommended Posts

We are running a G4+ with the Link CAN Lambda kit, sometimes works ok, eg ... .97 - 1.0 at cruise. Then for no apparent reason it will shoot to 4.500 give or take a shit load. This is clearly not correct. We scoped the sensor yesterday, waited for the reading to piss about to check the sensor output while the problem occurred and the sensor checked fine.

All the connections seem to be ok either side of the Link Can Lambda unit. Any ideas? Has anyone had issues with the Link Can Lambda unit?



Share this post

Link to post
Share on other sites

If the CAN lambda is the only device on the bus make sure you have a terminating resister fitted at the unit.

Also make sure the unit has a nice clean power supply as they do play up if the supply is overly noisy  

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now