sbn1979 Posted November 26, 2018 Report Share Posted November 26, 2018 Some weird issues on an evo 2, can lambda works but if the car stalls it takes like 10 minutes to restart and getting following getting errors but it works other instances no errors but it doesn't work Quote Link to comment Share on other sites More sharing options...
sbn1979 Posted December 3, 2018 Author Report Share Posted December 3, 2018 Carried out an update still the same, sometimes if I go into the can setup and re detect the cam lamda, ok then save, can status will turn green and all is well until I restart the car, preforming a store every time, 60 ohms on can line Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 4, 2018 Report Share Posted December 4, 2018 Go to the ECU status tab of the runtimes screen and report back what Lambda 1 status and Lambda 1 error parameters show when this happens. Quote Link to comment Share on other sites More sharing options...
sbn1979 Posted December 4, 2018 Author Report Share Posted December 4, 2018 ok adam will do Quote Link to comment Share on other sites More sharing options...
sbn1979 Posted December 4, 2018 Author Report Share Posted December 4, 2018 Also comes up with a 16 heating too long Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 5, 2018 Report Share Posted December 5, 2018 Ok, Error 16 is generally a power supply issue. Make sure the wires are big enough and the source is capable of 8A. They can also be sensitive to inductive noise on the power supply so if it is not powered by its own relay direct from the battery as per the prefered diagram in the quick start guide then you should try adding a 22uF capacitor accross the +/- power wires near the plug as per the alternative diagram. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.