Jump to content
johnny4ag

High low boost setup

Recommended Posts

Setup high low boost with switch, link ecu fury....switch off 1bar switch on 1.8 bar...digital 1 is gp input....multiple boost table ....active tables 2 tables..table2 activation digital 1....need setup high low boost solenoid?

Share this post


Link to post
Share on other sites
2 hours ago, johnny4ag said:

Setup high low boost with switch, link ecu fury....switch off 1bar switch on 1.8 bar...digital 1 is gp input....multiple boost table ....active tables 2 tables..table2 activation digital 1....need setup high low boost solenoid?

Sorry what? I'm not sure if anyone can understand your question. Please try it once again in other words. 

Share this post


Link to post
Share on other sites

It is still not clear what you are asking but a common set up would be as below.  2 wastegate tables, switched between via your switch.  When the switch is off it will use table 1, watsegate will be sent 0%DC, when the switch is on table 2 will become active and wastegate will get 50%DC.  These numbers are just made up to give you an example.

200zecp.png

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...