Jump to content
Confused

Cruise Active Output

Recommended Posts

Hi,

I have Cruise Control generally up and running OK, but would like to switch E-Throttle target table when Cruise is active to try to further smooth out the throttle response (a suggestion I saw in another thread on here).

I'm trying to set up an output as "Cruise Active", but it never switches to "On" state - have tried Virtual Aux, as a generic Aux and an Ignition Aux, but all with the same result - Cruise Active doesn't seem to change to Active.

I'm running 5.6.6.3557, and other than this, haven't come across any other issues, so would prefer to not roll back if possible!

Any advice or things to try will be appreciated (although may be a little slow in trying out suggestions due to the Christmas period)

Cheers!

Share this post


Link to post
Share on other sites

I assume you are using the "cruise light" output?  Unfortunately, this doesnt work at present, it was reported a few months back and is on the list of things to fix at the moment.  

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...