Jump to content
Godschylde777

Wiring Questions for Gracey

Recommended Posts

Ok I figured it out.  I will copy and paste my questions to be answered here.  Thank you so much for help given and future assistance.

Ok great.  My next question is My nitrous activation.  I already have everything else wired up.  I have the extension harness x2.  Which wire is a good one to connect the nitrous activation, and the nitrous pressure switch?  Again Thank you for your assistance.

 

harness.jpg

Wait, Wait lol.  Also my Innovative wide-band.  Do i now connect it to the external harness or do I splice it into the existing front o2?  If the external harness, which pin on the pic?

Share this post


Link to post
Share on other sites

Nitrous activation would likely go to one of the DI inputs, pressure switch could go to a spare DI or Volt input, all depends on what you have spare in your ECU configuration

If you're connecting the innovate analogue output to the ECU, you would use one of the spare Volt inputs

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...