Fotis Posted January 3, 2019 Report Share Posted January 3, 2019 Hi, i am having problems making the rpm limit shot flames and loud bangs. I have tried all the combination you can imagine, +4D fuel table to dumb extra fuel. So here is my current settings : I have tried Start TP low high different values. I have tried limit ignition trim up to -20deg. And still nothing. Can anybody help me? AFR recorded at RPM LIMIT was 10.26 which is the maximum i can get(Duty cycle 100%-720cc injectors...) Quote Link to comment Share on other sites More sharing options...
Fotis Posted January 5, 2019 Author Report Share Posted January 5, 2019 Up. Quote Link to comment Share on other sites More sharing options...
Ragnar Posted July 4, 2019 Report Share Posted July 4, 2019 Hello, sorry for breaking in but I’m also interesting know how to do it thanks Quote Link to comment Share on other sites More sharing options...
Tiz Posted July 5, 2019 Report Share Posted July 5, 2019 Change end cut to something like 75-80% rather than 100%. Quote Link to comment Share on other sites More sharing options...
JohnB Posted July 9, 2019 Report Share Posted July 9, 2019 I believe you need to enable “hard cut” timslib 1 Quote Link to comment Share on other sites More sharing options...
Leiden Posted September 7, 2019 Report Share Posted September 7, 2019 Turn hard limit on and pull more timing, I'd use something more reasonable for the control range, like 100rpm. Exit decay rate should be more like 20% Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.