Fotis 0 Report post Posted January 12 Hello there is it possible to set gear shift with activation conditions ( FULL TPS ,Low load, Rpm threshold ).IF now can i use a clutch switch instead? Quote Share this post Link to post Share on other sites
Adamw 445 Report post Posted January 13 you will need a clutch switch or lever switch. I don’t know how you would detect “low load” when you are at WOT. Quote Share this post Link to post Share on other sites
Fotis 0 Report post Posted January 18 Hi Adam well i though changing gear will reduce the load ( if you dont power shift obv).I need it only for backfires. But yes i will do it with a clutch switch Quote Share this post Link to post Share on other sites