Ronny Beeler Posted January 27, 2019 Report Share Posted January 27, 2019 I've been working on Subaru's basic settings for days, but I can't set the settings do the standarts for this car to make the WRX V5-6 runnig, have anyone a basic setting for wrx v5-6 that works?I think the problem is with the crankshaft sensor, he can not read the RPM, because I also get a wrong RMP on the ignition timing setting device Sorry for the bad english im from switzerland thanks ECU WRX Link 4+ Subaru Impreza RS WRX GC8 Engine EJ20 Quote Link to comment Share on other sites More sharing options...
neil brown Posted January 27, 2019 Report Share Posted January 27, 2019 Did you use the wrx5-6 base map did you calibrate throttle TPS and map sensor before starting and check crank sensors match Quote Link to comment Share on other sites More sharing options...
Ronny Beeler Posted January 27, 2019 Author Report Share Posted January 27, 2019 yes i used the WRX 5-6 base map I calibrateted the tps and the map sensor ( Map Sensor WRX 6-7) But i dont know how to set de crank sensor settings (i dont now where and wich values) the ecu cant recive any RPM Quote Link to comment Share on other sites More sharing options...
neil brown Posted January 27, 2019 Report Share Posted January 27, 2019 Rpm is transmitted when cam and crank are set up Quote Link to comment Share on other sites More sharing options...
ClintBHP Posted January 27, 2019 Report Share Posted January 27, 2019 Check the trigger with the built in trigger scope (ECU Controls - Trigger Scope), save a log and report back here. Quote Link to comment Share on other sites More sharing options...
Ronny Beeler Posted January 27, 2019 Author Report Share Posted January 27, 2019 there are the two files Trigger Scope Log 2019-01-27 7;23;48 pm.llg sorry for the bad picture Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 27, 2019 Report Share Posted January 27, 2019 Your cam and crank signals are swapped, you need to change the dip switches to the alternative positions as per the note in the manual below: Ronny Beeler 1 Quote Link to comment Share on other sites More sharing options...
Ronny Beeler Posted January 27, 2019 Author Report Share Posted January 27, 2019 thank you very much. I did not think it was that easy great help thank you allWith kind regardsRonny Beeler Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.