Problems With Impreza WRX 2000 GC8

[Ronny Beeler 0]

I've been working on Subaru's basic settings for days, but I can't set the settings do the standarts for this car to make the WRX V5-6 runnig, have anyone a basic setting for wrx v5-6 that works?

I think the problem is with the crankshaft sensor, he can not read the RPM, because I also get a wrong RMP on the  ignition timing setting device

Sorry for the bad english im from switzerland

thanks

 

ECU WRX Link 4+

Subaru Impreza RS WRX GC8

Engine EJ20

[neil brown 3]

Did you use the wrx5-6 base map

 

did you calibrate throttle TPS and map sensor before starting and check crank sensors match 

[Ronny Beeler 0]

yes i used the WRX 5-6 base map

I calibrateted the tps and the map sensor ( Map Sensor WRX 6-7) But i dont know how to set de crank sensor settings (i dont now where and wich values) the ecu cant recive any RPM

[neil brown 3]

Rpm is transmitted when cam and crank are set up 

[ClintBHP 57]

Check the trigger with the built in trigger scope (ECU Controls - Trigger Scope), save a log and report back here.

[Ronny Beeler 0]

there are the two files

Trigger Scope Log 2019-01-27 7;23;48 pm.llg

sorry for the bad picture

[Adamw 445]

Your cam and crank signals are swapped, you need to change the dip switches to the alternative positions as per the note in the manual below:

[Ronny Beeler 0]

thank you very much. I did not think it was that easy

great help thank you all

With kind regards

Ronny Beeler