Jump to content
banaro

Using Timers & Aux SwOff timers under 50ms

Recommended Posts

The help says that processing timer values under 50ms is unreliable, i have for example n2o injected some distance before the engine and i implement timer  functions to delay the change to ign timing until the n2o reaches the cylinders and in reverse on the turn off, the calculated times are obviously way less than 50ms, so am i wasting my time doing this?

Thanks for your help

Share this post


Link to post
Share on other sites

In the G4+, GP Outputs are evaluated every 20mS, so if you are using the timer as a GP output condition it could potentially be up to 22mS late worst case.  It looks like the 50mS note in the help file was a left over from the older G4.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...