Jump to content

Recommended Posts

Hello there,

I am working on setting up a Mitsubishi GDI engine with the Force GDI ECU.

I am using the ICS servo (dual coil, with 2x2 Minus, and 2 Plus) at Aux 5,6,7,8.

Now I am also wanted to connect my EGR system, which is also a servo with 4 signal wires and two coils. Any idea how I can connect this?

Also
-the purge valve
-one On/of bypassvalve
-one dutycycle bypassvalve

are there to connect.

 

Next thing (Maybe I will open another topic) is the construction of the High pressure Fuel pump. As far as I saw it, it is hardware controlled, and there is just a sensor to read the pressure. Am I able to use the ecu like that, without any pump valve connected?

Luftmassenmesser, Kühlmitteltemperatur, Bremsvakuumsensor.JPG

Share this post


Link to post
Share on other sites

Only Aux 5/6/7/8 are capable of stepper motor control.

 

4 hours ago, KK GDI said:

Next thing (Maybe I will open another topic) is the construction of the High pressure Fuel pump. As far as I saw it, it is hardware controlled, and there is just a sensor to read the pressure. Am I able to use the ecu like that, without any pump valve connected?

That would be highly unusual although I have never seen the mitsubishi system. I would expect there would have to be some electronic means to control pressure.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...