Jump to content
Sign in to follow this  
Jo LeForce

Always hitting LC rev limit on the run!

Recommended Posts

The car is an Evo 7 with plug-in ECU,  the car won't exceed the 5500 LC rev limit at any speed unless LC is disabled! LC settings are:

2D launch RPM table, disarm speed 15kph, Launch RPM table: 0 & 5 are at 5500rpm, the rest are all at 7500 the normal rev limit. I have the stock gauge cluster removed & replaced with the AIM Strada 1.2 dash, connected to the ECU via CAN +/-. The dash seems to be getting speed reading from the ECU fine.

Any clues what the problem is?

Share this post


Link to post
Share on other sites
20 minutes ago, ClintBHP said:

Under Chassis and Body what is your Speed Source set to ?

If looking here does not solve your issue please upload map and log file.

Driven wheel speed source is set to: LF Wheel Speed

Non driven wheel speed source is set to: off

Never bothered to check there since my ECU is plug-in & I'm getting speed readings fine on my dash

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...